Follow
the steps below to setup the Router & Phone Adapter
for your PPPoE Internet connection.
The easiest way is to start by connecting a PC iBroadVoice
Router & Phone Adapter. You can move the PC to a router/hub
after PPPoE is established.
- Contact a BroadVoice Customer Service Representative
at
to obtain the Admin Log In password for
your Router & Phone Adapter.
-
Setup
your network according to the Figure1 below. Be sure
to connect your PC via
an Ethernet cable to the LAN port of the Router & Phone
Adapter.
- Plug
the power adapter into the Router & Phone
Adapter. The red
LED on top of the
adapter will blink until these PPPoE settings are completed.
- Reboot your PC.
- In an address bar of
an open Internet browser type: 10.10.10.1 and hit enter.
- Enter
the Admin password provided to you by BroadVoice into
the Log In dialogue
box and click Login. This will open the GrandStream Configuration
page.
- Scroll down to the PPPoE
section and enter the PPPoE account I.D. provided to
you by your Internet service provider.
- Hit the Tab key
on your keyboard enter the PPPoE password for your Internet
service
account in the next field.
- Scroll to the bottom
of the page.
- Click on the Update button.
- The page will return with
a message "Your configuration
changes have been saved. They will take effect on next
reboot."
- Click on the link to "Click to view
your changes"
- Scroll to the bottom of the page
and click on the Reboot button.
- Surf the web! Your Router & Phone
Adapter is now configured to provide your PPPoE Login
information to access your
Internet service.
- Please return to the BroadVoice installations
instructions or Figure 2 below if you are utilizing a
router, hub
or switch to complete your network setup. As a reminder,
the router, hub or switch connects to the LAN port of
the Router & Phone Adapter. The Adapter
is a DHCP server/router and will provide IP addresses
for use with a network switch.
|
